2011 HAAS VF-2SS Vertical Machining Center
Used 2011 Haas VF-2SS Vertical Machining Center, 30"X, 16"Y, 20"Z, 12K RPM, WIPS, Low Hours
DESCRIPTION
Brand - HAAS
Model - VF-2SS
Type - Vertical Machining Center
Year - 08/2011
Serial #: 1088113
Cycle Start Time - 1482:27:09
Feed Cutting Time - 1261:45:549
SPECIFICATIONS:
Table Size: 36" x 14"
X-Axis Travel: 30"
Y-Axis Travel: 16"
Z-Axis Travel: 20"
Spindle Speed: 12,000 RPM
Spindle Motor: 30 HP
Spindle Taper: CT 40
Tool Changer: 24+1 ATC
XYZ Rapids: 1,400 IPM
Machine set-up to run 230 / 3PH / 60 (Verifying Exact)
Overall Dimensions: 101″ x 99″ x 101″ High
Weight: 7,800 lbs
EQUIPPED WITH:
Chip Auger
1MB Program Memory
Remote Jog Handle with Color LCD
24+1 position side-mount tool changer
USB Port - Memory Lock keyswitch
Rigid Tapping
Wireless Intuitive Probing System - Renishaw
Programmable Coolant
Probe Riser Block + Spindle Probe
55 Gallon flood Coolant Tank
Tool Tray/Tool Rack on Front
(2) Kurt Vises valued at $750 ea
** Spindle time as of December 14, 2023 – 1261 HOURS
** Replacement Cost New, As Equipped - $82,080
** Available for immediate purchase and removal
Notes: This HAAS VF-2SS was purchased new in 2011 and has been well maintained by original owner ever since. The VF-2SS had had light use over the years, with only 1261 hours of spindle time in 12 years = 100 hours per year. The seller’s shop was producing high-tolerance medical devices before owner decided to close down his business.
INV#: NM-200580
TERMS: Located in San Jose CA, “AS-IS,WHERE-IS”, Machine under power and available for in-person inspection. Full Payment due prior to shipment. Rigging/removal costs responsibility of buyer. Subject to prior sale. All specifications are assumed to be correct but must be confirmed by the purchasing entity. Any tooling or vises shown in photos not included in sales price, but can be added to the purchase.
* Oakland International Airport (60 Mins) and San Jose Mineta Airport (15 Mins) from location.
DISCLAIMER: The information presented in the write ups and the photographic representations of machine tools on this page are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Assume any tooling depicted in photos, is not included with the purchase. Price and information presented in the write ups on the web site are subject to change without notice. Norcal Machinery claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a formal quotation with current specifications.