Used Equipment

100 Ton X 10' Accurpress Advantage

Stock #: NM-220592

10’ x 1/4” Accurshear Model 625010 Hydraulic Shear, Year 1995 Great Accurpress hydraulic shear with 1/4” x 10’ capacity, loaded with 36” backgauge + CNC Co...

Stock #: NM-220592-A

Great Accurpress hydraulic shear with 1/4” x 10’ capacity, loaded with 36” backgauge + CNC Controller, 4’ squaring arm and more. Capacity (Mild Steel): 1/4...

Used 1996 Accurshear 625012 - 1/4" x 12' Hydraulic Shear

Nice working older Amada HA250, well maintained by our seller. FOB Paso Robles. - “AS-IS, WHERE-IS” off seller’s floor, Full Payment due prior to shipment. P...

Used ARS (Applied Recovery Systems) RST 3000 PUCK BRIQUETTER

Bliss Model HP2-150-48-36, 150 Ton Straight Side Press

Bliss 150 tons, Model HP2-150 72x36 Straight Side Press

Stock #: NM-220567

A real gem of a notcher! This machine came out of a medical devices research facility is is almost unused. This is the nicest used Boschert notcher out ther...

Stock #: NM-220572-A

Main Features - Four Punching Heads, 36 tons each, Trumpf Style Tooling - 5’ x 10’ sheet size - Fully automatic loading and unloading of 5’ x 10’ x up to ½” ...

Stock #: NM-220589

Used Cincinnati 1250 TON x 24', Model 1250H Hydraulic Press Brake, Year 1978

Cincinnati Model 4312 Mechanical Shear with 12' x 1/2" capacity

Cincinnati Model 4316 mechanical Shear, 16' x 3/8" Capacity, 48" Backgauge, 20 HP motor, Runs great, checked out thoroughly, Year 1966, A Beast!

5/8" x 14' Cincinnati 5FL14 Hydraulic Squaring Shear

Stock #: NM-220572

Four standard front gauge support arms 75 HP motor, Wired 460/3/60 Upgraded to 40% increase in ram speed Extra foot switch with selector Air cooled oil c...

MOTIONCAT TC650E CNC LATHE The Motioncat TC650E is a 2-Axis CNC controlled wood turning lathe designed for turning spindles, posts, columns, and even basebal...

MOTIONCAT TC650E CNC LATHE The Motioncat TC650E is a 2-Axis CNC controlled wood turning lathe designed for turning spindles, posts, columns, and even basebal...

Stock #: NM-20058-B

This is one of the nicest used Diacro hand powered sheet metal shears on the market, with a 36” x 16 gauge capacity. The Diacro brand was a large producer...

Used DOALL DC-460NC Dual Column Horizontal bandsaw with 18” x 18” Capacity, 1-1/2” Blade, PLC Control, Automatic Barfeed, 10 HP Motor, Year 2018

2018 FANUC D21MIB5ADV 4- AXIS ROBODRILL - ONLY 170 HOURS!

The GMC HBB-0410 is a heavy duty hydraulic box and pan brake; constructed of steel for maximum rigidity. Equipped with a robust and quiet German Rexroth hydr...

Stock #: NM-20034-B

2019 Guidetti Sincro 315 Wire Processing Chopping Mill

Used 2020 Haas Mini Mill Vertical Machining Center, 16"X, 12"Y, 10"Z, NextGen Control, 4th Axis, Chip Auger, 6K RPM, WIPS, Low Hours, Nice Condition