Ibarmia B70 Gear Head Drill
33” Floor Drill Press Gear Head Drive, Adjustable Rotating Work Table
The Clausing IberDrill B70 Gear Head Drive Drill Press features state or the art technology, that allows you to select the best rpm for the tool with step speed shift levers. 12 speeds 62 - 1120 rpm combined with 7.5 Hp spindle motor give excellent torque for drilling large holes, small holes to spot-face, counter-bore and ream. Electromagnetic clutch quill feed, with capacity production rated 2.75” in steel 3.15” in cast iron.
** Adding to the end of the model number “RS” adds the automatic tapping feature to this drill press. By setting a limit stop once the quill reaches this the spindle will automatically reverse.
Specifications:
Model - B70
Machine Style - Floor Drill w/Adjustable Table
Drive Type - Gear Head Drive
Drilling Capacity (in) - 2.75” Mild Steel
Tapping Capacity (in) - 2” Mild Steel (“RS” Models)
Number of Speed Steps - 12
Spindle Speeds (RPM) - 62 – 81 – 104 – 133 – 191 – 250 – 321 – 410 – 532 – 683 – 878 - 1120
Column to Spindle Center (in) - 16.5
Spindle Nose - 5MT
Spindle Travel (in) - 10.24
Quill Feed - Electromagnetic Clutch
6 Feed Ranges (in/rev) - 0.0039, 0.0079, 0.0118, 0.0157, 0.0197, 0.0236
Spindle to Work Surface Min/Max. (in) - 3.15 / 25.98
Column Diameter (in) - 8.66
Adjustable Table Surface (in) - 23.6 x 27.6
Work Table T-Slots (in) - 1/2
Base Size (in) - 35.8 x 23.2
E-Stop Switch - Yes
Voltage - 230 or 460
Phase - Three
Motor Horsepower - 7.5
Machine Weight (lbs.) - 1,852
Machine Dimensions (WxDxH in) - 24 x 40 x 103.9
Shipping Weight (lbs.) - 2,072
Shipping Dimensions ships laying down (LxWxD in) - 106.3 x 28 x 48
FOB: Kalamazoo, MI
Made in Spain
Machine Features:
Gear head drive with shift levers on the face of the drill
Gear box lubrication by automatic pump
Hardened and Ground high quality steel gears
7.5 Hp spindle motor
Built in low voltage electrical equipment
Depth scale and adjustable depth stop
Electromagnetic clutch quill feed system
Adjustable work table, rotating and tilting
Work light
Manual spindle reversing switch
“RS” Models are equipped with automatic spindle reversing system for tapping
Thermomagnetic motor breaker switch
Machined base with coolant tank
Safety drill guard with microswitch
Automatic tool ejector
Emergency stop button
CE mark