Ibarmia BP70 Prismatic Column Floor Drill

IbarmiaDrills

May 15

49.6” Prismatic Column Floor Drill Press Gear Head Drive, Large 40.9” x 23.6” T-Slot Work Table

Clausing IberDrill Gear Head Drive Drill Press with state or the art technology, allows you to select the best rpm for the tool with step speed shift levers. 12 speeds 62 - 1120 rpm combined with 10 Hp spindle motor give excellent torque for drilling large holes, small holes to spot-face, counter-bore and ream. 40.9” by 23.62” worktable with 3 T-Slots for wide range of job fixtures. Electromagnetic clutch quill feed, with capacity production rated 2.76” in steel 3.14 cast iron,

** Adding to the end of the model number “RS” adds the automatic tapping feature to this drill press. By setting a limit stop once the quill reaches this the spindle will automatically reverse.

Specifications:

Model - BP70
Machine Style - Prismatic Column Floor Drill
Drive Type - Gear Head Drive
Drilling Capacity (in) - 2.76” Mild Steel
Tapping Capacity (in) - 2.51” Mild Steel (“RS” Models)
Number of Speed Steps - 12
Spindle Speeds (RPM) - 62 – 81 – 104 – 133 – 191 – 250 – 321 – 410 – 532 – 683 – 878 - 1120
Column to Spindle Center (in) - 24.8
Spindle Nose - 5MT
Spindle Travel (in) - 10.24
Quill Feed - Electromagnetic Clutch
6 Feed Ranges (in/rev) - 0.0019, 0.0039, 0.0059, 0.0079, 0.0118, 0.0137, 0.0196
Spindle to Work Surface Min/Max. (in) - 9.06 / 43.3
Column Head Elevation - Motorized
Maximum Head Height (in) - 120.1
Column Diameter (in) - 8.66
Workable Surface (in) - 40.9 x 23.62
Work Table T-Slots (in) - 5/8
Base Size (in) - 62.6 x 47.24
E-Stop Switch - Yes
Voltage - 230 or 460
Phase - Three
Motor Horsepower - 10 HP
Machine Weight (lbs.) - 4,078
Machine Dimensions (WxDxH in) - 62.6 x 47.24 x 122.8
Shipping Weight (lbs.) - 4,630
Shipping Dimensions (LxWxD in) - 77 x 56 x 128

FOB: Kalamazoo, MI
Made in Spain