LOCKFORMER CORNER CADET | Corner Formers

Have one to sell?

info@norcalmachinery.com

Quantity

LOCKFORMER CORNER CADET Corner Formers | Norcal Machinery (1)

LOCKFORMER CORNER CADET Corner Formers | Norcal Machinery (2)

New

Have one to sell?

Overview

Type:

Corner Formers

Manufacturer:

Model:

CORNER CADET

Status:

For Sale

Description

Fast easy corner insertion and crimping in ducts and fittings. Although the Corner Cadet® is portable and light in weight, it’s heavy on performance, automatically inserting and crimping specially designed TDC/F corners in seconds. In addition to handling virtually every style of duct, the Corner Cadet® also works with multiple types of fittings. Automatic duct squaring. For ducts and fittings from 18 ga., 1.2 mm to 26 ga. and .6 mm galvanized mild steel.

Specifications

Suggested Blog Posts

New Saw Purchase

Mar 26, 2024 | Steve Humphries

The Sawing Expert SeriesBy Larry Anderson, Technical Advisor Saws are sold by salesmen who generally know their product and customers have a need that can be filled by purchasing a new saw from a well prepared salesman. Customers must always stay focused on their needs and also try to plan for an uncertain future. S...

Resolving Crooked Cuts - Lesson #6

Mar 26, 2024 | Steve Humphries

By Larry Anderson Technical AdvisorAnalyzing Issues Related To The Blade:1. A dull blade will generally cut crooked. 2. A blade should be discarded if the cut time grows by more than 50%. For instance: 20 cuts have been made and the cut time has been 10 minutes per cut. Without making any other adjustments and the c...

Resolving Crooked Cuts Lesson #5

Mar 26, 2024 | Steve Humphries

Larry Anderson Technical Advisor In Lessons 1 through 4 we have examined the saw. Now we should make a trial cut with very conservative settings to see if the crooked cut can be duplicated. A two inch (2”) round cold roll would be perfect, but then again a four inch (4”) square tube is easier to measure for squaren...

Resolving Crooked Cuts Lesson #3

Mar 26, 2024 | Steve Humphries

By Larry Anderson Technical Advisor The crooked cut problem has not been solved and we have checked for loose guides and guide arms that are not square to bed of the saw and found that this is not the problem. We have yet to remove the blade from the saw and it is time to think about tension.Analyze Blade TensionI...

Resolving Crooked Cuts Lesson #2

Mar 26, 2024 | Steve Humphries

By Larry Anderson Technical AdvisorAfter examining the blade guides and determining the jaw blocks are tight, we can move on to the next possibility. Guide Arm Squareness: Take a small scrap of steel 1/4" thick six inched long and clamp it to the blade so the six inches is straight vertical attached to blade. Put sq...

Resolving Crooked Cuts Lesson #1

Mar 26, 2024 | Steve Humphries

The Sawing Expert Series By Larry Anderson. Resolving Crooked Cuts Lesson step #1. Larry, a metal sawing expert, walks our users through a series of steps to get square and straight cuts on your saw.