RAMS 2001 | Notching Machines

Have one to sell?
(800) 721-9793
info@norcalmachinery.com
Have one to sell?

Overview

Type:
Notching Machines
Manufacturer:
RAMS
Model:
2001
Status:
For Sale

Description

Notch drive cleats before or after they are formed. Mounts readily to a bench. Easy spring loaded push handle. Easy to change hardened shear blades.

Max Thickness0.0359"0.9119 mm
Max Thickness (gauge)20 gauge20 gauge

Related Types

View All
Roll Formers
Roll Formers
42 Active Listings
Folding Machines
Folding Machines
26 Active Listings
Brakes, Box & Pan Manual
Brakes, Box & Pan Manual
18 Active Listings
Notching Machines
Notching Machines
18 Active Listings
Folders, CNC Combi Beam
Folders, CNC Combi Beam
6 Active Listings
Shears, Power Squaring (Gauge)
Shears, Power Squaring (Gauge)
14 Active Listings
Brakes, Apron Manual
Brakes, Apron Manual
13 Active Listings
Flangers
Flangers
12 Active Listings
Long Folders
Long Folders
9 Active Listings
Slitters & Slitting Lines
Slitters & Slitting Lines
10 Active Listings
Shears, Foot 0-72"
Shears, Foot 0-72"
9 Active Listings
Corner Formers
Corner Formers
8 Active Listings
Rolls, Manual Slip
Rolls, Manual Slip
8 Active Listings
Shears, Mechanical Gauge
Shears, Mechanical Gauge
2 Active Listings
Elbow Machines
Elbow Machines
8 Active Listings

Suggested Blog Posts

New Saw Purchase

Mar 26, 2024 | Steve Humphries

The Sawing Expert SeriesBy Larry Anderson, Technical Advisor Saws are sold by salesmen who generally know their product and customers have a need that can be filled by purchasing a new saw from a well prepared salesman. Customers must always stay focused on their needs and also try to plan for an uncertain future. S...

Resolving Crooked Cuts - Lesson #6

Mar 26, 2024 | Steve Humphries

By Larry Anderson Technical AdvisorAnalyzing Issues Related To The Blade:1. A dull blade will generally cut crooked. 2. A blade should be discarded if the cut time grows by more than 50%. For instance: 20 cuts have been made and the cut time has been 10 minutes per cut. Without making any other adjustments and the c...

Resolving Crooked Cuts Lesson #5

Mar 26, 2024 | Steve Humphries

Larry Anderson Technical Advisor In Lessons 1 through 4 we have examined the saw. Now we should make a trial cut with very conservative settings to see if the crooked cut can be duplicated. A two inch (2”) round cold roll would be perfect, but then again a four inch (4”) square tube is easier to measure for squaren...

Resolving Crooked Cuts Lesson #3

Mar 26, 2024 | Steve Humphries

By Larry Anderson Technical Advisor The crooked cut problem has not been solved and we have checked for loose guides and guide arms that are not square to bed of the saw and found that this is not the problem. We have yet to remove the blade from the saw and it is time to think about tension.Analyze Blade TensionI...

Resolving Crooked Cuts Lesson #2

Mar 26, 2024 | Steve Humphries

By Larry Anderson Technical AdvisorAfter examining the blade guides and determining the jaw blocks are tight, we can move on to the next possibility. Guide Arm Squareness: Take a small scrap of steel 1/4" thick six inched long and clamp it to the blade so the six inches is straight vertical attached to blade. Put sq...

Resolving Crooked Cuts Lesson #1

Mar 26, 2024 | Steve Humphries

The Sawing Expert Series By Larry Anderson. Resolving Crooked Cuts Lesson step #1. Larry, a metal sawing expert, walks our users through a series of steps to get square and straight cuts on your saw.

We use cookies to improve your experience. Privacy Policy.

Accept